Gmc 2011 Savana Manual de usuario Pagina 247

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 410
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 246
Black plate (39,1)
GMC Savana Owner Manual - 2011
Driving and Operating 9-39
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated,
.
Press and hold the SET button
on the steering wheel until the
desired lower speed is reached,
then release it.
.
To slow down in small amounts,
press the SET button on the
steering wheel briefly. Each time
this is done, the vehicle goes
about 1.6 km/h (1 mph) slower.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to
increase the vehicle speed. When
you take your foot off the pedal,
the vehicle will slow down to the
previous set cruise speed.
Using Cruise Control on Hills
How well the cruise control will work
on hills depends upon the vehicle
speed, load, and the steepness
of the hills. When going up steep
hills, you might have to step on
the accelerator pedal to maintain
the vehicle speed. When going
downhill, you might have to brake
or shift to a lower gear to keep the
vehicle speed down. When the
brakes are applied the cruise
control is disengaged.
Ending Cruise Control
There are three ways to end cruise
control:
.
To disengage cruise control,
step lightly on the brake pedal.
.
Press the [ on the steering
wheel.
.
To turn off the cruise control,
press
I on the steering wheel.
Erasing Speed Memory
The cruise control set speed is
erased from memory by pressing
the
I button or if the ignition is
turned off.
Vista de pagina 246
1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 409 410

Comentarios a estos manuales

Sin comentarios