Gmc 2011 Savana Manual de usuario descargar pdf (Pagina 355)

Black plate (89,1)

GMC Savana Owner Manual - 2011

Vehicle Care 10-89

6. Connect the red positive (+)

cable to the positive (+) terminal

of the dead battery. Use a

remote positive (+) terminal if the

vehicle has one. Do not let the

other end touch metal. Connect

it to the positive (+) terminal of

the good battery. Use a remote

positive (+) terminal if the vehicle

has one.

7. Now connect the black

negative (−) cable to the

negative (−) terminal of the

good battery. Use a remote

negative (−) terminal if the

vehicle has one.

Do not let the other end touch

anything until the next step. The

other end of the negative (−)

cable does not go to the dead

battery. It goes to a heavy,

unpainted metal engine part or

to a remote negative (−) terminal

on the vehicle with the dead

battery. On your van, use the

unpainted radio antenna bracket

as a remote negative (−)

terminal.

8. Connect the other end of

the negative (−) cable to the

negative (−) terminal location on

the vehicle with the dead battery.

On your van, use the unpainted

radio antenna bracket as a

remote negative (−) terminal.

Notice: Your vehicle uses the

unpainted radio antenna bracket

as a remote negative (−) terminal.

Move the antenna coax cable out

of the way before clamping the

negative jumper cable to the fixed

antenna bracket. Avoid touching

the negative cable clamp to the

air conditioning line. Failure to

do either of these could damage

your vehicle. The repairs would

not be covered by the warranty.

9. Now start the vehicle with the

good battery and run the engine

for a while.

1 2 ... 350 351 352 353 354 355 356 357 358 359 360 ... 409 410

Comentarios a estos manuales

Sin comentarios